DIY- Custom Scrabble Coasters!

Here’s an easy DIY project that takes minimal time and effort, and is the best part is, it’s customizable!

Here’s what you will need:

1. Scrabble tiles (can be bought on amazon in a pack of 100 for $5)
2. Thin Cork Board
3. X-Acto Knife
4. E6000 Permanent Craft Adhesive
5. Clear Polyurethane Coating

Directions:

1. Choose four 4-letter words for each coaster.
2. Using the E6000 adhesive, place a line of glue on the cork board and glue each row of 4 letters.
3. When all letters are glued down, place something heavy over the coaster to seal the glue in. Allow to dry for one hour.
4. Carefully use the X-Acto knife to trim away excess cork.
5. Place the coasters on a paper bag and spray the Polyurethane to coat the tiles.

That’s it! These make excellent gifts & stocking-stuffers for the holidays.